Μη τυπική φλάντζα
Non-standard flanges will only be used in cases where pressure, temperature and size requirements exceed the capabilities of standard flanges. Keep in mind that non-standard flanges require calculation, design and special manufacturing procedures, which is why they are chosen only as a last resort. The most common such applications are large equipment flanges and heat exchangers body flanges.
Non-standard flanges are designed and calculated according to ASME VIII Div.1 Appendix 2 and Appendix S, and according to ASME VIII Div.2 part 4.16.
Design criteria
Rules for the design of bolted flange connections as described in Div.1 Appendix 2 apply to flanges with gaskets placed entirely within the circle enclosed by the bolt holes and with no contact outside this circle.
This method is applicable to circular flanges under internal pressure and takes into account only hydrostatic end loads and gasket seating loads. Rules have been further modified so that they can be applied to the design of flanges under external pressure, reverse flanges and flanges with nut stops.
Design procedure for large diameter, low pressure flanges shall be supplemented by methods other than the code e.g.: check flange rotation. Flanges greater than 60 inches (1524 millimeters) inside diameter and designed for up to 100 psig (689 KPa) pressure fall under this category.
Μέγεθος
Μη τυπική φλάντζα: 1/4 ″ -160 ″
DN8-DN4000
ΥΛΙΚΟ:
Χάλυβας άνθρακα: ASTM A105, ASTM A105N, GB 20, C22.8.
Χάλυβας κραμάτων: ASTM / ASME A182 F1-F12-F11-F22- F5-F9- F91
Ανοξείδωτο ατσάλι: ASTM / ASME A182 F304-304L-304H-304LN-304N
ASTM / ASME A182 F316-316L-316H-316LN-316N-316Ti
ASTM / ASME A182 F321-321H, F347-347H
Χάλυβας χαμηλής θερμοκρασίας: ASTM / ASME A350 LF2.
Χάλυβας υψηλής απόδοσης: ASTM / ASME A694 F42, F52, F56, F60, F65, F70
Τύπος φλάντζας
America Series: Flat face (FF), Raised face (RF), Tongue (T), Groove (G), Female (F), Male (M), Ring type sendi face (RJ / RTJ)
Σειρά Europe: Type A (Flat Face), Type B (Raised Face), Type C (Tongue), Type D (Groove), Type E (Spigot), Type F (Recess), Type G (O-Ring Spigot), Τύπος H (αυλάκι δακτυλίου O)
Πίεση
America Series: Class 150, Class 300, Class 600, Class 900A, Class 1500, Class 2500.
Σειρά Ευρώπη: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400.
ΠΡΟΤΥΠΟ
Η μη τυποποιημένη φλάντζα μας μπορεί να παραχθεί με βάση το κοινό πρότυπο και να κάνει κάποια τροποποίηση σύμφωνα με τις απαιτήσεις των πελατών μας.
ASME ANSI B16.5, ASME ANSI B16.47.
API 605, API 6L.
MSS SP 44
CSA Z245.12
EN1092-1, EN1759-1.
DIN2630, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638.
BS1560, BS 4504, BS 10.
AFNOR NF E29-200-1
ISO7005-1
AS2129
JIS B2220
UNI 2276. UNI 2277. UNI 2278 .UNI 6089 .UNI 6090
Βιομηχανικές διεργασίες
Σφυρηλάτηση, Μηχανική κατεργασία.
Αίτηση για μη τυπική φλάντζα
Φυσικό αέριο, χημική ουσία, πετρέλαιο, ναυπηγική, ναυτιλία, χαρτοποιία, μεταλλουργία, ηλεκτρική, ηλεκτρική ενέργεια, λέβητας κ.λπ.
